How to turn Lane Change Assistant on/off on the BMW iX

2 min read

bmw ix

Lane Change Assistant on the BMW iX helps you seamlessly change lanes on multi-lane highways. It’s a driver assistance program that integrates with the blind spot monitor.
The Lane Change Assistant is an added safety layer when changing lanes. It’s only applicable on fast, multi-lane highways.
Lane Change Assistant is a great way to ensure a smooth lane change. However, you shouldn’t rely on it. Always make sure to manually check your blind spot before executing a maneuver.
On this page, you’ll find instructions on turning Lane Change Assistant on and off on the BMW iX.

How to turn on Lane Change Assist on the BMW iX

Follow the instructions as shown below to turn Lane Change Assistant on.

  1. On the central display, go to Car.
  2. Touch Settings.
  3. Select Driver assistance.
  4. Choose Driving.
  5. Tap Steering Assistant.
  6. Check the box next to Lane Change Assistant.

Lane Change Assistant is now enabled but not yet activated.
To activate Lane Change Assistant,

  1. Press the Assisted Driving button.
    • It’s on the left of the steering wheel, between SET and MODE.
  2. Check that the green symbol appears in the instrument cluster.

Lane Change Assistant is now activated.

How to use Lane Change Assistant on the iX

Lane Change Assistant can only be used on multi-lane roads such as freeways.
Follow these instructions to use Lane Change Assistant safely:

  1. Use the mirrors and look around to check the traffic conditions.
    • A warning light illuminates in the relevant mirror whenever a car is approaching in an adjacent lane.
    • Don’t initiate a lane change using Lane Change Assistant if it’s not safe to do so.
  2. Press and hold the turn signal stalk in the required lane change direction (down for left or up for right). Don’t hold it all the way. Move it to and hold it at the point that temporarily activates the turn signals. It should flash three times before deactivating.
    • If you try to activate Lane Change Assistant while another car is in your blind spot, your iX will intervene. Depending on your settings, it might sound a warning or intervene with your steering.
  3. After a moment, the Lane Change Assistant will automatically move your iX into the corresponding lane.
    • The instrument cluster icon also shows a green arrow when a lane change is actively happening.
    • Lane Change Assistant also helps your iX settle into position in the new lane.

Turning Lane Change Assistant off on the iX

If Lane Change Assistant is already active on the iX, you can turn it off.

  1. Press the Assisted Driving button again.
  2. Check that the icon disappears from the instrument cluster.

If necessary, you can altogether disable Lane Change Assistant in the Settings.

Adjusting the iX’s Lane Change Assistant

You can change the Lane Change Assistant settings in the iX by going to:

  1. Car.
  2. Choose Settings.
  3. Tap on Driver assistance.
  4. Select Safety and warnings.
  5. Scroll down to Lane change warning.
    • Touch your desired setting. You can choose from:
      • Early
      • Medium
      • Late
      • Off
  6. Activate or deactivate Steering intervention.

To change the intensity of the steering wheel’s vibration, go to:

  1. Car.
  2. Settings.
  3. Driver assistance.
  4. Choose Feedback via steering wheel.
    • Set the intensity you’d like. You can choose from:
      • Strong
      • Medium
      • Low

Steering wheel vibration intensity is set across all driver assistance programs. You can’t change it for one individually, aside from enabling or disabling the program.

Using Lane Change Assistant safely on the BMW iX

Before making a lane change, you should always check for traffic.
Although the car’s sensors constantly watch your blind spot, don’t rely on this. You should still look over your shoulder before changing lanes.
The Lane Change Assist might also not work correctly if the sensors can’t detect at least one lane edge. This could happen in:

  • Heavy rain, sleet, or snow
  • Dusty areas or dust on the sensors
  • Dirt roads
  • Poorly maintained/unpainted roads

Check out this PDF from the BMW iX’s owner’s manual.

owners manual


By Ben Kitchen Ben is a qualified car mechanic with experience working in the industry. He now works as an automotive author, writing about all things vehicle-related. He’s excited about the potential held by electric cars of all shapes, sizes, and types.

Ben Kitchen Ben is a qualified car mechanic with experience working in the industry. He now works as an automotive author, writing about all things vehicle-related. He’s excited about the potential held by electric cars of all shapes, sizes, and types.

How to replace the battery in the Nissan Leaf…

Without a working key, you can’t access your car. Over time, the cell batteries used in vehicle keys discharge and eventually stop working. There’s nothing unusual about this and nothing to worry about. If it’s severely discharged, you might...
4 min read

How to activate Party Mode on Tesla Model X

Teslas may or may not be the future of the driving world – but they represent the new EV era in all its glory. Cars are no longer simply four wheels and some seats. No, now they can be…...
3 min read

Chevy Bolt EUV maintenance schedule

All cars need regular maintenance, and the Chevy Bolt EUV is no exception. Regular maintenance means a car stays in good condition, making it pleasant to drive and safe, and helping it retain more value. This page walks you...
4 min read

Leave a Reply

Your email address will not be published. Required fields are marked *

Never miss a story from us, get weekly updates in your inbox.